12管电动车控制器(外国英语资料).docVIP

12管电动车控制器 Name 12 tube electric vehicle controller circuit board Wuxi Wanyuan electrical appliance manufacturer Operating voltage 24-72 (V) model, various models Rated power 500-1000 (W) specification 12 tubes Type brushless electric vehicle controller [product introduction] The brushless control panel sold is fully tested, with a master chip and all patch components on the circuit board. After the purchase of users, you need to refer to the instructions of the plug-in components list, wiring instructions, such as installation and debugging. This control board contains 6 tubes, 9 tubes, 12 tubes, 15 tubes and other varieties. The power supply voltage defaults to 48V and can be set to 36V or 60V. [specification parameter] 1. maximum current limiting value: 6 tubes (19A), 9 tubes (22A), 12 tubes (32A), 15 tubes (40A), 18 tubes, 24 tubes, 30 tubes, 36 tubes 2. applicable voltage: 36V, 48V, 60V (default is 48V). 3. output power: six tubes (350W), nine tubes (450W), twelve tubes (500W), fifteen tubes (800W). 4. undervoltage protection value: adjustable, the default value is 43.5 + 1V. 5. motor angle: 120 and 60 degrees compatible. 6. turn speed control voltage: 1.35 - - 3.2V, less than 1.35V, PWM is equal to 0%, more than 3.2V, PWM is equal to 100%. [product features] 1. the use of synchronous rectification technology reduces the temperature caused by the reverse flow of the controller. The dead time driven by the upper and the lower tubes is generated by the brushless driving module inside the singlechip, and is stable and reliable. 2. constant current control technology ensures that the electric vehicle has a large starting torque. The peak current control technique ensures that the maximum current will not exceed the peak value that the MOS can withstand. By wave current limiting technique, current detection and control are completed in each PWM cycle, So that the current value in real-time under the control of scm. The hardware overcurrent protection can cut off the