CFG长螺旋钻机的技术工法实践(外国英语资料).docVIP

CFG长螺旋钻机的技术工法实践 Technical practice of CFG long auger rig (a) geological survey status: basal bearing to dust sand layer (some clayey silt and silty clay layer 6), bearing capacity of the foundation value is 220kpa. (two) CFG: CFG pile (pile pre drilling pressure grouting cement pile) composite foundation for the researches in recent years that uses a new foundation treatment scheme, this method is simple and fast, the quality of construction is easy to control. The use of this technique in a project considered suitable and created for the first time in a project where the total height exceeds 100m is satisfactory. The size of a project, a project about total construction area of about 230 thousand m2, the four luxury apartment tower relates to foreign components, which 1# has started to start building the end, the implementation of 2# building construction, building 2#, total construction area of size 62089mm2, three layer underground, on the ground 34 layer. The foundation of the main building is a box foundation, and the main structure is full cast-in-place shear wall structure. 2# building a total height of 102m, the default + 0 equal to complete the elevation of 38.5m, -15.86m, -16.36m, basal elevation is -15.56m, the other is equal to the elevation of 22.64m, 22.14m and 21.94m completely. Two, CFG A. of the main arch pile preset things the final settlement is less than or equal to 80mm; B. is less than or equal to the total height of the largest arch over 0.8 per thousand; the anti floating problem C. does not consider the problem of basement. For more than 615 kPa D. foundation bearing capacity. (1) Henan Sanli mechanical parameters: pile CFG pile preset number 988 uniform root pile length 11.5m uniform pile diameter of 420mm cement grade C20 standard value of bearing capacity of single pile 750kN pile spacing of 1.29 * 1.30M 1.39 * 1.36M 1.52 * 1.42M 150mm thick gravel cushion cushion (two) bearing capacity of CFG pile composite foundation with simple calcul