Multisim笔记(外国英语资料).docVIP

Multisim笔记 Wheres the sliding rheostat for Multisim10? Basic column (in the column of resistance), the penultimate one: POTENTIOMETER About component rotation of Multisim Ctrl+ R, clockwise ctrl+, shift+, R, counter clockwise The VCC VDD is the positive power supply, and the VEE VSS is the negative power supply. Because the N type bipolar transistor C is connected, so it is called Vcc, N type MOS transistor D is connected, so it is called Vdd Similarly, there are Vee, Vss The VCC represents the power source connected to the triode collector (C). The VEE represents the power source connected to the triode emitter (E). The VDD represents the power source of the drain (D) connected to the fet. The VSS represents the power source that connects the source of the field effect transistor (S). Usually VCC and VDD are power positive, while VEE and VSS are power negative or ground The Vcc and Vee appear in bipolar transistor circuits, and are related to the collector (collector) emitter (emitter), so One, one, one negative. The Vdd and Vss appear in the MOS circuit, and are related to the leakage level (Drain), the source (Source), and the one and the other. The Vcc and Vdd are the power terminals of the device. Vcc is the positive component of bipolar devices, and Vdd is mostly positive for single stage devices. DCpower generally refers to the actual voltage with the source, the other is the label (in some simulation software in the default label and connected to source). VDD: supply voltage (unipolar device); supply voltage (4000 series digital circuit); drain voltage (FET) VCC: supply voltage (bipolar device); supply voltage (74 series digital circuit); voice operated carrier (Voice Controlled Carrier) VSS: ground or power negative VEE: negative voltage power supply; FET source (S) VPP: programming / erasing voltage. Detailed explanation: In electronic circuits, the VCC is the power supply voltage of the circuit, and the VDD is the working voltage of the chip: VCC:C=circu