ESP88_PVTest(安全测试)BOSE.docVIP

Model: ESP-88 No. of Samples: 1 Safety Engineer: Mario Espinal Test Location(s): Safety Lab Date: 5/20/08 Comments: Product continues to meet the requirements. TEST SAMPLE IDENTIFICATION The table below is to provide correlation of sample numbers to specific product related information. Refer to this table when a test identifies a test sample by Sample No. only. Sample Number Serial Number Power Supply Model Number Power Input Rating (V, Hz) Manufacturer 1 041759E n/a 100-240V, 50/60 Hz Bose Corporation TEST INSTRUMENTS REFERENCE LIST Reference Number Instrument Type Manufacturer Model Number Serial Number Calibration Date Last Due 1 Leakage meter Simpson 228 062401 3/27/08 3/27/09 2 Power analyzer Valhalla Scientific 2100 3-6637 3/27/08 3/27/09 3 Hi-pot tester QuadTech Sentry 30 0238671 3/27/08 3/27/09 4 Caliper Mitutoyo CD-6”CS3/27/08 3/27/09 5 Ground bond tester Associated Research, inc 03160 9390068 3/27/08 3/27/09 6 Variable Transformer Powerstat 1256DT n/a n/a n/a 7 DMM Fluke Corp 87 III3/27/08 3/27/09  TEST CONDITIONS NORMAL OPERATING CONDITIONS: The apparatus shall be positioned as follows: According to the instructions provided by the manufacturer. The apparatus shall be operated as follows unless otherwise specified in the individual test Method and Results: The apparatus was tested a supply voltage rating of + or – 10% of the rated nominal voltage or voltage range. The frequency of the mains supply that the apparatus was connected to during tests was 60 Hz unless otherwise noted. Any position of user controls (except volume and tone controls) that may be adjusted by hand. Special Instructions - Unless specified otherwise in the individual Methods, the tests shall be conducted under the following ambient conditions. Confirmation of these conditions sha