薄型水地暖的优势大盘点(国外英文资料).docVIP

薄型水地暖的优势大盘点 Floor heating is a kind of plumbing, compared to other traditional Plumbing (thick), laying it relatively simple, shorter time, the thickness is not high and more energy-saving, so recently in some high-grade communities, thin plumbing is very popular. Then, thin water heating in the end what are the advantages? It is suitable for old buildings and families with lower floors It is understood that the traditional water heating is the hot water pipe on the ground floor plate of polystyrene insulation board, water is not less than 50mm thick gravel concrete filled layer is fixed, and then paving the floor, floor tile, concrete filled layer by heating to heat, the traditional water warm layer thickness 8 cm -10 cm. Thin water heating adopts polystyrene insulation board with grooves to fix the hot water pipe, no concrete filled layer, which directly paving the floor, floor tiles, aluminum foil insulation board surface by uniform heat dissipation, thickness of about 4 cm, 6 cm, weight is the traditional water heating 1/120, will not destroy the original floor load-bearing structure, suitable for the old buildings and the lower floors family. No discount for heat dissipation The warm water thin polystyrene insulation board is thin, but the density of more than 35 kilograms per cubic metre, a wooden keel in the insulation board with dual function of load-bearing and thermal insulation, and the density of the traditional water heating polystyrene board used in about 20 kilograms per cubic meter. In the process of drafting national standards, have carried out strict experiments on the insulation board thin water heating used per square meter, pressure bearing, experiments show that families in the heavy bookcase, placed in warm water on the piano thin without pressure imbalance, as long as it conforms to the national standard, thin water the warm plate is no problem in load-bearing. The thin water warm, hot water pipe through the heat conducting aluminum foil in