IBM V系统存储 hyperswap实施手册(英文).doc

IBM V系统存储 hyperswap实施手册文档信息(文档编号IBM SVC-70) 文挡名称 作者 电话 QQ IBM V系统存储 hyperswap实施手册 朱亚铭150111099 文档修订记录 编号 修订内容简述 修订日期 修订前版本号 V1.0 整体文档的编写 2016.12.23 注：技术交流邮箱 ymzhu2005@163.com  一、Configuring an IBM HyperSwap topology system 窗体顶端 窗体底端 A HyperSwap? topology system assists with high availability and site disaster recovery. A HyperSwap topology system can be configured through site allocation and topology change command-line (CLI) commands. The management GUI configures a HyperSwap topology with the Modify System Topology wizard, which guides you through all the steps easily. 1.1 About this task To access the Modify System Topology wizard, select Monitoring System. In the Actions menu, select Modify System Topology. Configuring site information for the systemTo configure a HyperSwap system topology, you must assign enclosures, external storage systems, and hosts to a specific site. Creating HyperSwap volumesYou can use the management GUI or the command-line interface (CLI) to create HyperSwap volumes. A HyperSwap volume has one copy on each site. Converting an existing volume to a HyperSwap volumeYou can use the management GUI or the command-line interface to convert a basic volume to a HyperSwap volume. You convert the basic volume by adding another copy of the volume in a second site. 二、Configuring site information for the system 窗体顶端 窗体底端 To configure a HyperSwap? system topology, you must assign enclosures, external storage systems, and hosts to a specific site. 2.1 Using the management GUI You can use the Modify System Topology wizard in the management GUI to easily configure the site names and assign objects on your system to a site. The Modify Topology wizard automatically detects any Fibre Channel-attached storage, but iSCSI storage must be added manually before the site assignments can be configured. You can use either the management GUI or the command-line interface to add Storwize systems. D