井下安全阀简介试卷.ppt

* * * * * * * * * * MTM Downstop Seat金属对金属的底部截止密封 Complete Isolation of the Closure Mechanism关闭状态下完全隔离 Eliminates Flow From Entering the Operator of the Valve防止流体流入阀体 Full Protection During Flowing Conditions流体流动状态下完全保护 Enhanced Debris Isolation增强碎屑隔离功能 Isolation of Lower End下端隔离 Open Position * Dedicated Exercise Profile 优越的活动结构 Standard Feature Within All SP? TRSVs 所有SP ? 的标准特性 Allows Flow Tube to be Manipulated Upwards or Downwards Via Slickline可允许流管经过钢丝工具上下运动 Helps Prevent TRSV Permanent Lock Open可有效防止永久锁常开 * SP? TRSV - Debris/Scale Protection Summary SP? TRSV-防碎屑/积垢功能 Features特点 Benefits优越性 Wiper Ring On Upper Flow Tube Downstop在流管运行到最底端时其上部的刮环 Metal-to-Metal Face Seat At Flow Tube流管上金属面对金属面的底座 Critical Components Isolated From Well Debris/Scale With Valve In Open Position 非常关键的组成部分,在安全阀打开状态下隔离碎屑 Clean-Out Ports In Flow Tube’s Upper End流管上端的清洗孔 Area Above Flow Tube Free Of Solids Buildup 避免了流管上方的碎屑堆积 Flow Tube Fluted Seat Guide流管座上有导向槽 Fluted Guide Provides Maximum Protection To The Flow Tube Allowing Fluids To Enter And Exit During Valve Operation导向槽在安全阀打开过程中允许流体通过的同时最大程度的保护了流管 Prevents Eccentric Loads on Flow Tube Selective Internal Exercise Profile可选择内部活动结构 Flow Tube Can Be Manipulated By Slickline If Necessary如有必要可进行钢丝作业上下活动流管 Helps Prevent Permanent Lock Open or Workover 防止永久锁定长开 Teflon Coated Flow Tube ID Available (Baked On By Means of Heat Treat Ovens)可选含内涂Teflon层的流管 Prevents Scale Build-Up防止碎屑堆积 * SP? TRSV Specifications SP? TRSV参数 * Recent and Current Developments当前项目研究 Slimline TRSV 9 5/8” SP TRSV For 13-3/8” Casing; 在 13-3/8” 套管里下入的9 5/8” SP TRSV 7” SP TRSV For 9-5/8” Casing在9-5/8” 套管里下入的7” SP TRSV 4 1/2” NE TRSV for 7” Casing在7” 套管里下入的4 1/2” NE TRSV Cementing Through TRSV’s可进行挤注水泥作业的安全阀 XHP/HT超高温高压 Deep-Set TRSV深井用井下安全阀 DepthStar * SP TRSV design设计 11.75” OD (High-Strength Nickel Alloy高强度镍合金) 12.02” OD (80ksi MY Material抗拉材料) Runs inside 13 3/8” casing下入在13 3/8”套管里的 8.50” ID内径 Compatible with 9 5/8” 47# tubing和9 5/8” 47#套管相配套的 5,000 p