闭式冷却塔的计算模拟 - 高校化学工程学报.pdfVIP

26 2 No.2 Vol.26 2012 4 Journal of Chemical Engineering of Chinese Universities Apr . 2012 1003-9015(2012)02-0216-06  1 1 1 1 2 , , , , (1. , 200237; 2. , 200444) 4 10 Matlab Hasan 4 10 Hasan 10 Matlab TQ051.5 TQ021.3 A Simulation of Closed Wet Cooling Towers 1 1 1 1 2 ZHENG Wei-ye , ZHU Dong-sheng , SONG Jin , ZENG Li-ding , ZHOU Hong-jian (1. Key Laboratory of Pressure Systems and Safety, Ministry of Education., East China University of Science and Technology, Shanghai 200237, China; 2. Shanghai Baofeng Machinery Manufacturing Co. Ltd, Shanghai 200444, China) Abstract: The heat and mass transfer of closed wet cooling towers were analyzed, a computational model was presented to predict the temperature distribution along the tower. A comparison between 1-D and 2-D was made. For the 1-D model, each tube row is an element and the 2-D model contains 4 and 10 elements per tube row, respectively. Based on Matlab programming, the cooling procedure program of cooling tower was composed. The difference of cooling water temperature distribution along the tower calculated separately by the 2-D model with 4 elements and with 10 elements is very small. Results obtained by 2-D model are closer to the results given by Hasan than those obtained by 1-D model. Based on Matlab programming, the outlet temperatures of cooling water in tubes were predicted by stepwise calculation with 10 elements per tube row. Compared with t