平版印刷墨斗辊油墨流场的分析与仿真.pdfVIP

2014 年 9 月 机械科学与技术 September 2014 第 33 卷第9 期 Mechanical Science and Technology for Aerospace Engin优ring Vol.33 No.9 001; 10. 13433/j.cnki.1ω3-8728.2014.0锁炀 平版印刷墨斗银油墨流场的分析与仿真 王毅l 气刘凯1 ，张海燕2 ，曹从军2 c 西安理工大学机械与精密仪器学院，西安 71制8;2 西安理工大学印刷包装工程省级重点实验室，西安 71似8) 摘要: 为了提高油墨预置精皮，优化墨键结构，并依此精确控制输出墨量，对墨斗系统在不同条件τ 油墨运动流场建立数学模型和仿真计算， 分析了油墨出口处油墨的流动速度分布情况，并对墨斗辑 变转速、墨键变开皮条件下墨斗流场的速度和压力的变化规律以及与油墨流量的关系进行了阐述。 结果证明该方法能更准确地确定墨键开皮、墨棍转迫和墨量的关系。 关键词:油墨流场; 流量;仿真 中图分类号:15825 文献标识码: A 文章编号:1 ∞3-8728 (20 14) 09-1309-05 Analysis and Simulation on Ink Flow Field of OfTset Ink Fountain 1 2 2 Wang Yi ,2 ,Liu K矿， Zhang Haiyan , Cao Congjun ( . Sch∞I of Mechanical and Precision lnstrument Engineeri吨， Xian University ofTechnology , Xian 71∞48; 2Printing and Packaging Engineering Key Laboratory of Shaanxi Province , Xi an University of T创hnology ， Xian 71α)48) Abstract : In order to improve the accuracy of ink preset and optimize the structure of the ink key , the mathematical model of the ink flow fields with different parameter百 conditions is established. Numerical simulations are performed to obtian the velocity distribution of flow fields at ink key opening side. And the variation law of fountain flow velocity and pressure is analyzed un der the condition of variable speed and opening degree. 叽le results show that the relat ionship among ink key opening degree , ink roller speed and the f1 0w rate of ink can be accurately determined. This study can provide theoretical basis for the accurate control of ink f10w during actual work. Key words : boundary conditions; calcu lation s; computational fluid dynamics; computer simulation; computer software; f1 0w fie