藉由Simulink 结合ModelSim 学习单相相控整流器原理与其实验验证 .PDF

明新學報32 期pp.141-156 Volume 32, Minghsin Journal, August 2006 藉由 Simulink 結合 ModelSim 學習單相相控整流器原理與其實驗 驗證 蔡明發∗ 周家榮 柯富瀞 張逸凡 黃彥騰 王瑞坤 明新科技大學電機工程系 摘要 學習相位控制整流器原理是電力電子與電動機控制課程重要的一環，本文藉由 Simulink 與 ModelSim 連結之模擬軟體工具，學習相位控制整流器的工作原理，文中分別建構單相相控整流器之類比與數位控 制模型，進行模擬與分析，並分別利用類比運算放大器與 Altera Flex8282 FPGA 可程式數位邏輯元件設 計相控整流器控制電路，來進行實驗驗證。學生們可藉此 Simulink 與 ModelSim 連結之共同模擬環境， 配合硬體實作與實驗結果，更能清楚地瞭解相控整流器驅動原理。 關鍵字：相控整流器、Simulink 模擬軟體、ModelSim 模擬軟體、FPGA 可程式邏輯元件 Learning the Principle of Single-Phase Controlled Rectifier via Simulink Linked with ModelSim and Experimental Verifications Ming-Fa Tsai Chia-Jung Chou Fu-Ching Ke Yi-Fan Zhang Yan-Teng Huang Jui-Kum Wang Department of Electrical Engineering, Minghsin University of Science and Technology Abstract Learning the principle of phase-controlled rectifier is one important aspect in the courses of power electronics and electrical motor control. In this paper, the application of Simulink linked with ModelSim is developed for simulation and learning the phase-control rectifier technique. The single-phase controlled rectifier simulation model for analog and digital control has been constructed, respectively. For experimental verifications, the phase-controlled rectifier circuits based on analog operational amplifiers and an Altera Flex 8282 FPGA programmable digital logic device have also been designed, respectively. Students can then use the simulation model together with the experimental results to learn the driving principle of the phase-controlled rectifier more