74系列芯片的型号区别与功能略表（国外英文资料）.doc

74系列芯片的型号区别与功能略表 The difference between the models and functions of a 74 series chip 74HC/LS/HCT/F series chip difference: The 1 and LS are low power Schottky, and the HC is a high-speed COMS. LS is slightly faster than HC. The HCT inputs and outputs are compatible with the LS, but the power dissipation is low; the F is a high speed Schottky circuit; 2, LS is the TTL level, and the HC is the COMS level. 3, LS input open to high, HC input is not allowed to open the circuit, HC generally require a pull-down resistor to determine the level of input invalid. LS doesnt have that seek 4, LS output drop-down, strong pull weak, HC pull down the same. 5, the work voltage is different, LS can only use 5V, and HC is generally 2V to 6V; and the working voltage of HCT is generally 4.5V ~ 5.5V. 6, the level is different. The LS is the TTL level with its low and high levels of 0.8 and V2.4, respectively, while the CMOS is 0.3V and 3.6V at the operating voltage of 5V, so CMOS TTL can drive, but in turn is not good 7, driving ability is different, LS general high level driving ability is 5mA, low level is 20mA; and CMOS level is 5mA; 8, CMOS device antistatic ability is poor, easy to latch problems, so the CMOS input pin can not directly connect the power supply. The 74 series of integrated circuits can be broadly divided into 6 major categories: .74 * * (standard type); .74LS * * (low power Schottky); .74S * * (Schottky); .74ALS x (advanced low power Schottky barrier); .74AS * * (advanced schottky barrier); .74F * x (high speed). In recent years, the 74 series of high-speed CMOS circuits have emerged. The series can be divided into 3 major categories: .HC is the COMS operating level; .HCT is the working level of TTL and can be used interchangeably with 74LS series; .HCU is CMOS in the buffer circuit. The 9 74 series products have the same logic function and pin arrangement as long as the label is the same. According to the different conditions and requirements, you can choose diffe