Esprit在慢走丝编程的方法（国外英文资料）.docVIP

Esprit在慢走丝编程的方法 The steps of wire cutting are carried out 1) import graphics files or draw graphics (Pro/E wildfire version to *.SAT, UG to Parasolid) A: click open. In the open options dialog box, you must check the line box option so that you can edit the graphics and query the data. 2) determine the coordinate system on the workpiece (usually looking for the center of the workpiece or one of the corners) 1: Edit - choose move belt here. 2: the mouse points to the workpiece coordinates you want to select origin 3) analyze the machining process of the workpiece (where the workpiece is to be processed) 4) create threading points (using CAD functions to add dots or small rounds) 5) and then create the features on the geometry (cutting contour machining or chamfer machining, on line to the president as a chain). Change thread: feature selection you want to modify, in the property management field and select enter, leave (in line), the arrow points in the graph after you enter, leave (in line). Or enter coordinates 6) select the EDM machine type (EDM, Machine, Types) menu from the tool library (Tools) menu, and select the EDM machine type. 7) machining settings 1) set the origin 2) do machining (according to different requirements to do different processing) 8) simulation Simulate: choose Machining (Simulateion), set various simulation parameters, and simulate to check the machining process . 9) change to NC code. From the file (Files) menu, select the NC code (NC Code), or press the F9 key. In the formats (Machine), select the post-processing file for the machine (such as Ch190.asc). If Ch190.asc is not displayed in the machine tool format drop-down menu, click the browse icon to find it. Once you browse for the.ASC file, it will be added to the machine tool format drop-down menu. 10) transfer the NC code to the NC machine tool for processing. Use - - (start) New: close the current file so that users can start a new job. If the current file changes, the system will in