star350打印机（国外英文资料）.doc

star350打印机 Panel operation boot function In addition to the above functions, the buttons on the control panel press different buttons at the same time of booting, and have the following special functions. 1 self check 1 press the [on line] key while booting, the printer performs a short self check, prints its version ROM - number and current EDS settings. 2 press [] key and skip the boot, the printer for a long self, all of the characters and print English Chinese characters library. 2, sixteen, hexadecimal printing In this mode, the data received by the printer is printed in sixteen hexadecimal format instead of printing according to the actual processing effect, which is very useful for analyzing the problems in printing. 1 press the press paper / paper / return paper key and turn on the machine at the same time. When a sound is heard, the printer enters the sixteen decimal printing state. 2 when printing is finished, the printer must be left offline to print out the last line. 3 print mode lock Press the [print mode] key to switch on at the same time. The printers printing mode will be locked in the state indicated by the panel and will not be changed by the commands accepted by the printer. 4 EDS settings and printer lateral adjustment 1 press the [paper / paper / paper [] []] skip back online and at the same time, the key to boot, the printer will enter the EDS 1 setup mode. 2 press [Print] [copy] [paper / export / paper] key and turn on at the same time, the printer will enter the EDS one, 2 settings mode. 3 press the paper / paper / return button and switch on at the same time. The printer will enter the printer to adjust the setting mode. Please refer to the next section for detailed operation of the EDS settings and printer lateral adjustment function. Panel function operation on line In line status, panel operations refer to the following picture 1 automatic paper tearing function (chain paper) 1 set printer online status 2 press the paper / paper / back p