公路实务案例1（国外英文资料）.docVIP

公路实务案例1 background As a first class highway earthwork subgrade, pavement cement stabilized soil inorganic binder base, according to the conditions of the actual situation of the project and construction units, the construction unit of human equipment, the central station central legal construction process, in which a section of concrete construction process as follows: 1. construction lofting, restore midline. 2. of the soil material, the construction of cement stabilized soil base for aggregate, cement and other materials as required. 3. the mixing of the mixture is easy to consider in the central station with factory mixing equipment for centralized mixing, and no special stabilized soil concentrated mixing machinery. 4. mix transportation is used Dump Truck 8 tons, in order to prevent sunlight and rain, have covered tarpaulin. 5., after determining the coefficient of loose paving, paving the mixture. 6., rolling, light roller with heavy-duty vibratory roller rolling. The straight line and the curve section are rolled by the shoulder of both sides to the center of the road, and the super high flat curve segment is arranged, and the outer shoulder is rolled to the inner shoulder. 7. seam treatment. problem 1. inorganic binders stabilized base, according to the use of materials which are divided into several categories? Can cement stabilized soil and inorganic binders be used on the highway base? 2. inorganic composite stabilized base, according to the construction method is divided into which kinds? 3., the centralized construction of the central station of this project is complete, is the preparation work complete? Why? 4. what are the specific requirements for the soil, aggregate and cement needed for the construction of cement stabilized soil base course? 5. please point out what problems exist in the construction of this project and correct it. Main points of answer: 1, inorganic binding stability class according to materials can be divided into: cement stabili