屏蔽主泵贫铀飞轮完整性分析.pdfVIP

2017.№2 大 电 机 技 术 47 屏蔽主泵贫铀飞轮完整性分析 1,2 1,2 张贵滨 ，张振禹 （1. 黑龙江省核主泵工程技术研究中心，哈尔滨150066； 2.哈尔滨电气动力装备有限公司，哈尔滨150066） [摘 要] 为避免反应堆紧急停堆或断电事故中堆芯损坏，需要在屏蔽主泵电机上安装储能飞轮，为使其 在有限的空间内产生较大的转动惯量，屏蔽主泵飞轮材料采用高密度贫铀合金金属材料。本文主要对贫铀 飞轮的完整性进行了研究，从应力强度和断裂力学两方面对贫铀飞轮进行了分析，结果表明：在设计和额 定转速下飞轮的应力强度和断裂强度因子满足设计规范的要求，并通过解析分析结果与有限元分析结果的 对比表明应力分析结果合理可信。 [关键词] 主泵屏蔽电机；贫铀飞轮；应力强度；断裂力学 [中图分类号] TM343 [文献标识码] A [文章编号] 1000-3983(2017)02-0047-04 IntegrityAnalysisonDepletedUraniumFlywheel ofthe Shield-Pump 1,2 1,2 ZHANGGuibin , ZHANGZhenyu (1.EngineeringResearch Center ofRCP HeilongjiangProvince,Harbin 150066,China; 2.Harbin ElectricPower Equipment Co.,Ltd.,Harbin 150066,China) Abstract: To avoid damage of reactor core in scram of the reactor or the event of loss of motive power, the flywheels have to be mounted on canned-motor pump to store potential energy mechanically. Simultaneously, shiedpump flywheel is made out of aheavy depleteduranium alloy, which has higher inertia in confined space. The integrity analysis of depleted uranium flywheel is concerned in the aspects of structure strength and fracturemechanics.The analysisresults show that the stress and fracture ductility are both satisfactory to the requirements of regulations under the rated speed as well as the design speed. It can be concluded that the result is credible due to the consistencybetweentheresultsofanalyticalmethodandfinite elementmethod. Keywords:pump canned-m