煤岩材料SHPB实验被动围压数值模拟研究_李成武.pdf

31 6 Vol.31 No.6 2014 11 Journal of Mining Safety Engineering Nov. 2014 1673-3363-(2014)06-0957-061 SHPB (() 100083) LS-DYNA Holmquist-Johnson-Cook (HJC)SHPB SHPB SHPB HJC TD 315 A DOI:10.13545/j.issn1673-3363.2014.06.021 Numerical analysis of split Hopkinson pressure bar test with passive confined pressure for coal LI ChengwuWANG JinguiXIE BeijingHU PoWANG Chuan (School of Resource and Safety EngineeringChina University of Mining Technology (Beijing)Beijing 100083China) Abstract Coal or rock dynamical disaster poses grave threats to the coal mine safety and high effi- ciency production. So, research on dynamic properties of coal under the complex stress state is signifi- cant. By using the software LS-DYNA, the Φ50 mm split Hopkinson pressure bar(SHPB) tests for coal have been numerically simulated by using the Holmquist-Johnson-Cook (HJC) constitutive model. Based on the finding that the numerical simulation results were similar to the experimental results, pas- sive confined pressure SHPB of coal has been simulated. It is demonstrated that elasticity modulus of sleeve, thickness of sleeve, friction coefficient of contact surface, interval between sleeve and specimen significantly have significant impact on dynamic properties of coal. According to the research results, a new layer to the coal pillar can be added. It can improve shock resistance of coal pillar by designing op- timal parameters of additional layer: elasticity modulus, thickness,