蓖麻油酸镧对聚氨酯自结皮泡沫性能的影响研究开发.pdfVIP

2015 34 7 CHEMICAL INDUSTRY AND ENGINEERING PROGRESS 1993 530006 0.3 0.6 TQ 323.8 A 100066132015 DOI 10.16085/j.issn.1000-6613.2015.07.031 Effect of lanthanum ricinoleate on the performance of water-blown integral skin polyurethane foams LAN Ping QIAO LeileiLIAO Anping NONG Yong QIN RongdiLIU Qian LI Huabin CHEN Hui School of Chemistry and Chemical EngineeringGuangxi University for NationalitiesKey Laboratory of Chemical and Biological Transformation Process of Guangxi Higher Education InstitutesNanning 530006GuangxiChina Abstract Lanthanum ricinoleate was obtained by the reaction of lanthanum nitrate and ricinoleic acid and used as a catalyst on the preparation of water-blown integral skin polyurethane foams (ISFs). The effect of lanthanum ricinoleate on the performance of water-blown integral skin polyurethane foams was investigated by Fourier transform infrared spectrometry (FT-IR)ultraviolet–visible spectroscopy biomicroscope and electronic universal testing machine. The results indicated that lanthanum ricinoleate could change the foam structurereduce the foamrelease timeimprove the foam strength and surface hardness of the bubbles. The foam showed ideal cell structure with the addition of 0.3 pbw and 0.6 pbw lanthanum ricinoleate. Key words lanthanum ricinoleate; catalyst; blend; water-blown foam; foams; gels; abscess [7-8] 50×104t 2014-11-28 2015-01-08 [1-4]ISF [2011]47 2011GXNSFD018015 [2013]16 [5-6] gxun-chx2013098 1969E-mail gxlanping@163.com