基于振动特性的回转窑监测系统研究资料.pdfVIP

第43卷第5期 中国测试 Vol.43 No.5 2017年5月 CHINA MEASUREMENT TEST May,2017 doi:10.11857/j.issn.1674-5124.2017.05.013 基于振动特性的回转窑监测系统研究 1 1 2 1 张 云 , 赵 晨 , 郑 凯 , 胡昭中 （1.武汉理工大学机电工程学院，湖北 武汉 430070；2.重庆邮电大学先进制造工程学院，重庆 400065） 摘 要：为实现回转窑工况的实时监测，正确评估回转窑运行状态，建立筒体及托轮动力学振动模型，分析回转窑故 障源与故障表征方法的对应关系。在此基础上，提出基于托轮振动特性的回转窑状态监测方法，设计基于LabVIEW 的回转窑状态监测系统，完成对托轮振动信号时频域特征趋势的实时监测，实现对回转窑故障模式的分类及运行状 态评估。测试分析试验结果表明：设计的系统可实时对回转窑运行状态做出评估，为回转窑安全维护提供参考依据。 关键词：回转窑；托轮；振动模型；监测系统 文献标志码：A 文章编号：1674-5124（2017)05-0058-08 Research on rotary kiln monitoring system based on viberation characteristics 1 1 2 1 ZHANG Yun ，ZHAO Chen ，ZHENG Kai ，HU Zhaozhong （1.School of Mechanical and Electronic Engineering，Wuhan University of Technology，Wuhan 430070，China； 2.School of Advanced Manufacturing Engineering，Chongqing University of Posts and Telecommunications， Chongqing 400065，China） Abstract: In order to realize real-time monitoring and evaluate the running status of rotary kiln，a dynamic vibration model of shell and supporting rollers is established and the corresponding relationship between fault source and fault characterization is analyzed. On this basis，a condition monitoring method for rotary kilns based on roller vibration characteristics analysis is proposed ，and the rotary kiln monitoring system based on LabVIEW is established to monitor the time-frequency domain feature of roller vibration signals，which implements the classification of various failure modes and