运输过程中预制木结构房风载荷分布的模型 - 华南农业大学学报.pdf

292 Vol.29,No.2 20084 Journal of South China Agricultural University Apr.2008 ,,,, (,510642) :, , .: ;,645 Pa;,; ,. :;;; :S784 :A :1001-411X(2008)02-0112-03 Modeling the Wind Pressure Distribution on a Prefabricated Wood Framing Structure During High-Speed Transportation HU Chuan-shuang,LI Chong-gen,LIAO Hong-xia,LU Qun-xia,YUN Hong (College of Forestry,South China Agricultural University,Guangzhou 510642,China) Abstract:The computational fluid model (CFM) was used to analyze the wind pressure distribution on the walls of the prefabricated wood framing house during high-speed transportation with the ultimate pur- pose of optimizing the installation of the wind pressure sensors used to measure the wind-caused forces. The main findings are as follows:the developed CFM was a successful analytical investigation on the pressure behavior on the wood framing structure while being transported and revealed useful information on the forces applied to the structure by the wind pressure;it also pointed out very practical results on the pressure gradient on the front and rear walls and the maximum pressure was 645 Pa;the best possible configuration for the pressure sensor mounting was found out in order to track the pressure data more ac- curately and economically. Key words:timber constructing house;wind forces;prefabricated;numerical model , 、 、 、、 . [1-2] . ,, 20.0m 4.8m,16t. . , 、 ,, :2007-03-06 :(1978—),,,,E-mail:cshu@scau.edu.cn :;(4400-K05107) 2 : 113 ,, 110 km/h.,