铝土矿浮选尾矿制取铝硅铁合金时团块性能研究 - Journal of.PDF

第33 卷第5期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol133,No.5 2012 年 5 月 Journal of Northeastern niversity( Natural Science) May 2 0 12 罗洪杰, 刘宜汉, 姚广春, 孙 挺 ( , 110819) : , , # : ; # ,; # : ;; ;; : TF 111. 13 : A : 1005-3026( 2012)05-0694-04 Performance Research of Briquettes Used for Preparing Al-S-i Fe Alloy with Flotation Tailings of Bauxite as Raw Materials L UO Hong-j ie, LI U Yi-han, YA O Guang-chun, S UN Ting ( School of Materials Metallurgy, Northeastern niversity, Shenyang 110819, China. Corresponding author: L O Hong-jie, E-mail: luohj @ smm. neu. edu. cn) A stract: sing flotation tailings which were formed during Bayer beneficiation producing alumina as raw materials, using coal and petroleum coke as reductant, and the dry powder of pulp as adhesive, the briquettes material for reduction smelting was obtained by mixing and the suppression. Compressive strength and specificresistancewere detected. T he results showed that the compressive strength and specificresistanceof briquettes are different with changing of types of coal. The compressive strength increases with increasing the content of dry powder of pulp in briquette, but the specific resistance decreases quickly. The changes of reductant proportion, which means theproportion between coal and petroleum coke and all of them is used as reductant at the same time, have no significant influence on the compressive strength and specific resistance. Key words: compressive strength; specific resistance; briquette; flotation tailings; A-l S-i Fe alloy , 20% ,