汽车资料2（Car information 2）.docVIP

汽车资料2（Car information 2） How to work: animation demonstration 2009-04-07 15:19:58: personal journal The differential has three functions: The engine is powered to the wheel The vehicles final drive reducer, which reduces its rotation speed for the last time before the transmission hits the wheel To transfer power to the wheel during rotation at a different speed (this is why it is called a differential) This article will introduce the reasons for the differential and the shortcomings of the differential. We will also introduce several anti-slip differential, also known as limited slip differential. Why do you need a differential? The speed of wheel rotation is different, especially when turning. In the animation below, you can see that each wheel travels at a different distance when turning, and the inside wheel is shorter than the outer wheel. Because the speed is equal to the distance traveled divided by the amount of time it takes to get through the distance, the shorter journey of the wheel is lower. Notice also that the distance between front and rear wheels is different. This is not a problem for the non-driving wheels on the car (the rear wheels of the rear wheel drive the cars rear wheels). Because there is no connection between the front wheel and the back wheel, they spin independently. But the drive wheels are wired together so that a single engine and a transmission can turn both wheels at the same time. If the car does not have a differential, the wheels must be locked together to rotate at the same speed. This way the car will not be easy to turn - in order for the car to turn, a tyre must slide. For modern tires and concrete roads, tyres need a lot of power to slip. This power must be transferred from one wheel to another, which creates a lot of pressure on the shaft assembly. What is a differential? The differential is a device that separates engine torque from two directions, allowing the torque to be rotated at different speeds. The front wheel dr