注塑调机（Molding the）.docVIP

注塑调机（Molding the） Our goal: Arm the active individuals with skills and ideas Chapter 1 basic of plastic injection molding Advantages of plastics - light and tough Plastic is made of petroleum, but some say that using plastic can save oil. From the aspects of synthesis, formation and transportation, the amount of energy used in plastics is less than that of any other material. Its biggest advantage is the forming process easy. Purpose of plastic use: To reduce the cost of materials Because resources are relatively cheap, they should be applied to the most appropriate places. In order to reduce the processing cost Plastics are suitable for mass production, and processing engineering can be simplified or even automated. In addition, plastic is mostly passed but a finished product, no coating, post-repair processing, therefore, investment equipment amount can be reduced. The process must consider reducing labor as much as possible. To reduce weight An eighth of the weight of iron. Alleviating part of use and promotion. To avoid rust and corrosion Plastics do not rust. The artificial number can be reduced because it does not need to be rustproof. However, waste usually does not decompose and take care of. In order to achieve the desired shape It can be made into sheet metal, stamping and so on. In order to achieve ideal shape and appearance Brightly colored, usually without coating, good modeling, can achieve beautiful patterns. You need to be insulated Good insulation, can be used for insulation and cold use. The use of plastic materials should be noted Precision difference The expansion coefficient is large, usually bimetallic class. In addition, some plastics will change in size due to temperature or durability. Heat resistance is usually not good High temperature resistance, usually less than 100 degrees. flammability Most of them are flammable, some of which produce poisonous gases when burned, and when incinerated, it is easy to produce black smoke or corrosive gas