测量学3（Surveying 3）.docVIP

测量学3（Surveying 3） The second part of the test question bank - a single option (1-86) 1. The vertical distance between the ground point and the elevation datum is called the point (). A. relative elevation; B. Absolute elevation; Height of C. 2. The space position of the ground points is represented by (). A. geographic coordinates; B. C. Coordinates and elevation The absolute elevation is (). A. Horizontal plane; B. earth level surface; C. Assume the level surface 4. The average distance of a certain distance is 100mm, and its round-trip is + 20mm, while the relative error is (). A.; B.; C. 5. Line AB azimuth Angle is 186 °, the coordinates of the straight line azimuth for the coordinates of BA (). A. 96 ° 276 ° c. b. 6 ° 6. The measure of accuracy in distance measurement is used (). A. round-trip; B. relative error; C. Closure error 7. The azimuth Angle of the coordinate is the Angle of (), clockwise to the Angle of the measuring line. A. True meridian direction; B. Magnetic meridian direction; C. Coordinate axis direction The measurement of distance measurement results in the (). A. Diagonal distance; B. Horizontal distance; C. Line distance The length of the round-trip line AB is: the relative error is (). A.K = 1/3100; B.K = 1/3200; C.k. = 10. The role of the transit point in leveling is to pass (). A. direction; B. Elevation; C. distance 11. The circular level axis is the zero of the inner wall of the circle level. A. tangent; B. Normals; C. vertical 12. In order to eliminate the influence of Angle error on the height difference of a station, the level of the water level can be placed in (). A. Near the front ruler; B. two feet in the middle; C. near the back ruler 13. The reason for the parallax is (). A. incomplete instrument calibration; B. There is no overlap between the objects and the cross wires; C. cross - wire drawing board position is incorrect 14. The distribution principle of high difference closure difference is () to be distributed in direct propo