煤矿开采（Coal mining）.docVIP

煤矿开采（Coal mining） 1. Coalfields: large areas of coal mining area 2. Well: the part of coal mine that is divided into a mine 3. Mine production capacity and well type: (1) according to the mine production capacity, China divides the mine into large, medium and small types, known as well type. (2) the year of the mine Production is the number of coal produced annually in the mine. The length of the mine well field is not less than 1500m. The medium-sized mine is not less than 4000m; Large mines are not less than 7000m. 3. Type of mine shaft: vertical roadway, horizontal roadway, inclined roadway. 4. Approved production capacity: the comprehensive production capacity after verification is called the approved production capacity. 5. According to different production capacity, mine is divided into three types: big, small and medium. Large mines: 1.20mt/a, 1.50 Mt/a, 1.80mt/a, 2.40mt/a, 3.00 Mt/a, 4.00 Mt/a, 5.00 Mt/a and 5.00 Mt/a; Intermediate mines: 0.45mt/a, 0.60mt/a, 0.90mt/a; Small mines: 0.90 Mt/a, 0.15 Mt/a, 0.21 Mt/a and 0.30 Mt/a. 6. Annual production of the mine: coal produced annually by the mine, which is represented by wan t or Mt. Annual output refers to the actual amount of coal produced per year, which is often different from mine production capacity, and the annual output is often unequal. The greatest economic stripping ratio: the cost of coal mining is not greater than the cost of coal mined underground. 8. Classification of mine roadways: vertical roadway, horizontal roadway, sloping roadway. 9. Dark vertical well: also known as blind shaft, blind vertical shaft, straight straight lane that is not directly connected to the ground. 10. Dark inclined well: an inclined well that is not directly connected to the ground. 11. Main mountain: service at a mining level inclined alley. 4 stages and levels: (1) within the scope of the field, along the tendency of coal seam, according to a certain level the coal seam is divided into several parallel to the direct