电机与变压器（Motor and transformer）.docVIP

电机与变压器（Motor and transformer） One. Fill in the blanks 1. The transformer is a transformation (ac) voltage, and the (frequency) static electrical equipment. 2. The core of the transformer is commonly used (silicon steel sheet), which can be divided into two categories (core type) and (shell type) because of the different position of coil. 3. The no-load operation of the transformer refers to the working state of a winding (rated voltage) and secondary winding (open circuit) of a transformer. 4. The winding is in series, also known as (the head and tail), namely connecting the two coils (the different name ends), the total electromotive force is two electromotive force (addition), the electromotive force will (more and more). 5. The first criterion to be discriminating between three - phase windings is (magnetic path) symmetry, and the three-phase total flux is (zero). 6. One winding and secondary windings of transformers, according to different needs can have (triangle) and (star) two kinds of connection. 7. The transformer model is s7-500/10, where S stands for (three-phase), and the digital 500 indicates (rated capacity 500KV · A); 10 (high voltage winding voltage level 10KV). 8. The transformer top oil temperature generally should be under 85 ℃, such as sudden high oil temperature, cooling device may be defective, it is possible that the transformer (the internal winding circles or interlayer short-circuit fault. 9. The relationship between one side of the autotransformer and the secondary side of the transformer is both (magnetic) and (electricity). 10. The number of turns of the current transformer is very few, and the circuit is connected to the measured circuit. The number of turns of the voltage transformer is more than the number of turns, and (parallel) is connected to the measured circuit. 11. The relationship between the motor speed and the power frequency of the power grid can be divided into (synchronous) motor and (asynchronous) motor. 12. The rotatio