配管工程术语（Piping engineering terminology）.docVIP

配管工程术语（Piping engineering terminology） 1.1 in order to ensure the quality of pressure piping design, standardize the term of piping piping. 1.2 this regulation is applicable to the design of pre-design (basic design) documents and construction drawing design documents of the companys pressure pipeline. 1.3 reference standard technical term of petrochemical enterprise piping engineering (SH/T3051). Two general section 2.1 piping piping shall be assembled according to the requirements of process flow, production operation, construction and maintenance. 2.2 nominal diameter of nominal diameter of pipe, pipe fitting, valve, etc. 2.3 the nominal pressure of pressure pipe, pipe fitting, valve and so on shall be allowed under the specified temperature to withstand the pressure level indicated by the pressure level. 2.4 pressure of working pressure working pressure pipe, pipe fittings and valves under normal operating conditions. 2.5 design pressure design pressure in the normal operation process, in the corresponding design temperature, the pipe may bear the highest working pressure 2.6 strength test pressure strength test pressure pipe strength test. 2.7 pressure of seal test pressure (pressure test pressure) sea1 test pressure pipeline seal test. 2.8 the temperature of working temperature of working temperature of working temperature under normal operating conditions. 2.9 design temperature design temperature in normal operation process, under the corresponding design pressure, the pipe may bear the highest or minimum temperature. The medium suitable medium is suitable for the medium of pipe material under normal operating conditions. 3 pipes and pipes The pipe pipe is generally a cylinder with a length far larger than diameter, which is the main component of the pipe. 3.2 pipe line (pipe line) is connected by pipe, pipe fitting, valve, etc., conveying fluid or transmitting fluid pressure. 3.3.3 piping system (piping) piping system with a single set of design conditions