某空调底盘坯料尺寸及工艺优化.pdfVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 某空调底盘坯料尺寸及工艺优化 夏江梅1 2 3 3 李崇 庄新如 欧阳诚 渊1.重庆工业职业技术学院袁重庆401 120 曰2.重庆大学材料科学与工程学院袁重庆400044 曰3.格力电器渊重庆冤有限公司重 庆400039冤 摘 要院为解决某空调底盘成形过程中 料多的问题袁 利用有限元分析软件eta/DYNAFORM 对空调底盘的坯料 尺寸进行优化袁得到了合理的坯料尺寸遥用尺寸优化后的坯料模拟底盘成形过程袁指导修边工序切刀的布置遥通过模拟 优化袁减小了下料尺寸袁切边工序由四周全切边改为局部切边袁成形过程中减少了 料袁提高了材料利用率遥 关键词院底盘曰坯料尺寸曰工艺优化曰模拟曰材料利用率 中图分类号院TG386 文献标识码院 A 文章编号院 Optimization of Blank Size and Process of Air-conditioner Chassis 1 2 3 3 XIA Jiangmei , LI Chong , ZHUANG Xinru , OUYANG Cheng (1.Chongq ing Industry Polytechnic College,Chongq ing 40 1120,China; 2.College of Material Science and Engineering, Chongq ing Unive ris ity ,Chongq ing 400044,China 曰3.Gree Eletric App liance (Chongq ing)CO.,L TD, 400039,China) Abstract 院In order to reduce the waste material of the air-conditioner chassis during the forming process, the finite element simulation software eta/DYNAFORM was used to optimize the blank size of the air-conditioner chassis, and the reasonable blank size was obtained. The optimized blank size was used to simulate the forming process of the chassis and the result provides conduct for the arrangement of the cutters in the later trimming process. The blank size is decreased and the trimming process is changed from all sides trimming to part sides trimming through the simulation and optimization. As the waste material is reduced in the forming process, so the material utilization is improved. Key words 院chassis; blank size; pro