制氧资料（Psa data）.docVIP

制氧资料（Psa data） Industrial oxygen generator principle is the use of air separation technology, first of all, the air with high density compressed recycled air condensation point of each component in the different in gas and liquid from under a certain temperature, further distillation. In the industry with oxygen is obtained by the physical methods, higher levels of large air separation equipment general design so that I can make oxygen, nitrogen and other gases can fully displacement in the process of climbing and falling temperature, to be able to rectify. Home oxygen generator working principle: using molecular sieve physical adsorption and desorption. Molecular sieve oxygen generator in loading, when the pressure in the air can be nitrogen adsorption, the remaining oxygen is collected, which are not absorbed after purification treatment becomes a high purity of oxygen. Molecular sieve adsorption in relief when the nitrogen emissions to the environment in the air, the next time preparing the pressurization and adsorption of nitrogen and oxygen, the whole process for periodic dynamic cycle, molecular sieve is not consumed. Oxygen generator How the product works: All medical oxygen generator adopt is currently the worlds advanced PSA (pressure swing adsorption) of air separation by PSA technology, it is based on the agent (zeolites) of oxygen in the air, the differences between the nitrogen adsorption capacity to implement the separation of oxygen and nitrogen. When the air enters the bed layer with adsorbent, the nitrogen adsorption capacity is stronger and the oxygen is not adsorbed so that high concentration of oxygen can be obtained at the outlet end of the adsorption bed. As the adsorbent has the characteristics of the adsorption capacity with the pressure change, the pressure can be changed and the adsorption and desorption operation can be performed alternately. The principle of PSA oxygen production is shown in the following