加气砖质量标准（Air brick quality standard）.docVIP

加气砖质量标准（Air brick quality standard） Aerated concrete blocks Aerated concrete blocks are mainly raw materials such as cement, slag, sand, lime, etc., and the solid block is formed by stirring molding and steam pressure curing. The size of aerated concrete block is 13-46. The specification and dimensions of aerated concrete blocks are 13-46 Block nominal size block size Length L width B height H length L1 width B1 height H1 600, 100, 125 150 200 250 300, 200, 250 300 L - 10 B H - 10 120 180 240 The compressive strength of aerated concrete is divided into: A1, A2, A2.5, A3.5, A5, A7.5, A10 strength grade. The gas concrete blocks are divided into: B03, B04, B05, B06, B07 and B08. The gas concrete blocks are divided into good grades, first grade and quality products according to dimension deviation and appearance quality, density and compressive strength. The allowable deviation and appearance quality of aerated concrete blocks shall be in accordance with the provisions of table 13-47. The allowable deviation and appearance quality table of the aerated concrete block size table 13-47 Project indicators Grade one grade a grade (1) size allows deviation (mm) length L1 plus or minus 3 plus or minus 4 plus or minus 5 Width B1 plus or minus 2 plus or minus 3 plus 3, minus 4 Height H1 plus or minus 2 plus or minus 3 plus 3, minus 4 (2) the number of missing edges is not more than 0, 1, 2 Maximum size must not be greater than (mm) 0 70 70 The minimum size must not be greater than (mm) 0 30 30 (3) the plane bending must not be greater than (mm) 0, 3, 5 (4) the number of crack bars is not more than 0, 1, 2 The crack length of any surface shall not be greater than 0, 1/3, 1/2 of the crack direction The crack length shall not be greater than 0 1/3 1/3 of the total of the crack direction of the crack (5) burst, mould and damage depth shall not be greater than (mm) 10, 20, 30 (6) the surface is porous, and the layer is not allowed to be allowed (7) surface oil is not allowed not to b