亚克力热压图像（Acrylic thermal pressure image）.docVIP

亚克力热压图像（Acrylic thermal pressure image） Acrylic photo laser engraving, carving out a grayscale, layered tips Questioner: ausbusy | number of views: 850 times I use corel draw output, and I go to the laser machine, and the pictures that are carved are very dead and solid images. Was it a question of turning black and white? Try a lot of transformation, also be like white face a pile, do not have deep shallow layer feeling, excuse me have tall person, guide me some tips? Very thanks... Problem supplement: Thank answerer: bjhuazhizun answer, very fast, has sincerity very much, Ill try to ps, try like before, you dont succeed, the gentleman, decided to try again, look line not line, come back again,,,,,,,, I am waiting for more detailed answer other... Thanks again: bjhuazhizun!! Ill help him with that There is a technical content in it, and of course it has something to do with your equipment. A, using image software Photoshop to deal with the first photo, into grayscale, reverse, adjust good contrast, metal tube of the radio frequency laser machine can directly output, peace with printers, adjust good power and speed, can carve; If your laser machine need to export the file, also in photoshop software completes the figure, can export BMP format, and then import the laser output is ok, carving photos power not too big, try a few times more!!!! How to use laser engraving machine engraving pictures to hang a net in PS? Into Photoshop, point bar menu file (F), open the selected processing graphics menu bar - point of (I), selected [images] size (size set itself) - point of images of the menu bar (I) select the gray [model] (G) display is still off color information click ok, image showed that 100% (gray), and then point of images of the menu bar (I) select the multi-channel model, point figure resolution 380 (pixels per inch) method halftone screen, click ok to appear drab screen frequency (line/inch) Angle 45 ° 38 circular shape, click ok appeared can be saved as a BMP b