带电作业简答（A short answer to a charged job）.docVIP

带电作业简答（A short answer to a charged job） 1. How many regular tests are available for live tools? How long is the trial period? Answer: electric test and mechanical test should be carried out on a regular basis. The test cycle is: Electrical test: once a year, the test of the test is conducted once a year. The test interval is half a year. Mechanical test: insulation tools once a year, metal tools twice a year. What is insulation puncture? A: insulation material in the electric field, as a result of polarization, leakage current and the effect of heat loss generated by partial discharge, when the electric field intensity exceeds a certain value, conducting channel will be formed in insulation materials and make the insulation damage, this phenomenon is called insulation breakdown. What is a combination gap? Answer: when the operator is in the intermediate potential, the distance from the earthing is the sum of the distance of the electrified body. 4. What is the minimum operating distance? A: the body parts of the operator, including the minimum air distance between the handheld conductor and the charged body. 5. What are the main responsibilities of the guardian in the live work? A: (1) clearly being monitored and monitored; (2) before work, the custodial personnel should be assigned to the security measures, informing the danger points and the safety precautions; (3) supervise the custodial personnel to observe the procedures and site safety measures, and promptly correct unsafe ACTS. What should be done when the equipment is suddenly out of power? A: (1) the operating equipment is still charged; (2) the head of the job should contact the dispatcher as soon as possible, and the duty should not be sent before the person in charge of the job is contacted. (3) the working person shall report to the dispatching department on the situation of the work site or, in the light of the actual situation, bring the staff to the site for immediate evacuation. 7. What rules should