常用导线的连接（Connection of common conductors）.docVIP

常用导线的连接（Connection of common conductors） As you can see, it is possible to die. The world stands alone and in shadow. Cage osprey, in the river of continent. My fair lady, the gentleman is good. The snow was crushed with orange, and the frostbite shoots the shoots. Homer sometimes nods. A fool may make a fool of his own. 2.2 connections of commonly used wires In electrical decoration project, the connection of wire is one of the basic technology of electrician. The quality of wire connections is associated with the reliability and safety of wiring and equipment operation. The basic requirements for wire connection are: good electrical contact, sufficient mechanical strength, beautiful joints, and normal insulation. 2.2.1 cutting of line insulation layer 1. The cutting of plastic hardwire insulation layer It is convenient to remove the insulation layer of plastic hard wire when conditions are available, which requires cutting with wire clamp and electrical knife. Wire core section below 2.5 square centimeters and plastic hard line, cutters cutting cutting available: in the first thread required length, cut broken insulation skin gently with the combination pliers mouth, taut wire, then left hand right hand appropriate forcibly knead a combination pliers head, push outward to the insulating layer. See figure 2.11. In the case of the de-insulation layer, the shear force cannot be added at the mouth of the tongs. This will damage the core and even cut the wire. (a) (b) (c) Figure 2.11 wire cutters are used to cut the plastic hardwire with an electrical knife For the insulating layer of plastic hard wire with a specification of more than 4 square centimeters, it is difficult to cut directly with the wire pliers. According to the length of the line head first, cut the wire into the plastic insulation layer at 45 degrees with the knife edge of the electrical knife, and pay attention to the cutting of the insulation layer and not the wound and core, as shown in FIG. 2.12 (a