快速成型技术 2（Rapid prototyping 2）.docVIP

快速成型技术 2（Rapid prototyping 2） Chapter 6 rapid prototyping technology 2 4.1 quick prototype technology introduction 2 The basic principle of 4.1.1 rapid prototyping 2 4.1.2 rapid prototyping process 3 4.1.3 characteristics of rapid prototyping technology 3 The 4.2 RP process introduction 5 4.2.1 introduction of typical RP process method 5 4.2.2 typical rapid prototyping technology is compared to 8 4.2.3 other rapid prototyping technology 9 4.4.3 SCPS350 uv light rapid prototyping machine 10 4.3.1 basic principle and production process of SCPS350 uv rapid prototyping machine 4.3.2 the introduction of the control software of the rapid prototyping machine tool of SCPS350 4.3.3 SCPS350 uv light quick forming machine machine tool case explanation 16 Chapter vi rapid prototyping technology 4.1 introduction to rapid prototyping technology Rapid Prototyping (Rapid Prototyping) is developed in the late 1980 s and early 90 s, emerging manufacturing technology is made by the three dimensional CAD model directly drive fast any complex shape, the floorboard of the three-dimensional entity. It integrates modern technological achievements such as CAD technology, numerical control technology, laser technology and material technology. It is an important part of advanced manufacturing technology. Because of its complex 3 d manufacture into a series of two-dimensional overlay, thus it can be generated under the condition of without mould and tool almost any complex parts, greatly improved production efficiency and flexible. Is different from the traditional manufacturing method, rapid prototyping based on parts CAD geometric model, discrete and nc forming system by the software, using laser beams or other method will materials piled up to form a solid parts. With nc machining, casting, metal cold spraying, silicone mold manufacturing technique, the combination of model has become a modern, powerful means of mould and parts manufacturing, in the aerospace, automobile motorcycle, househo