施工工艺大全套管成孔灌注桩施工（Construction of the construction process big full casing hole filling pile construction）.doc

施工工艺大全套管成孔灌注桩施工（Construction of the construction process big full casing hole filling pile construction） Construction of casing hole filling pile Into casing hole filling pile with hammer hammer or vibration pile driving machine, set with a flapper pile tip or reinforced concrete precast pile tip (boots) steel pipe hammer or vibration sink into the soil, then pour concrete, with volume field tube drawing machine or while vibration extubation pile. Its technological characteristics are: can adapt to more complex stratum, can use small pile tube to make bigger section pile, carrying capacity is big; The casing wall can avoid the defects such as slump, choke, pull, shift and empty. Can be able to sink, construction speed, high efficiency, simple and safe operation. The technological standard is applicable to the basic soil of industrial and civil building, which is generally cohesive soil, silt and silty soil. A bit of sand soil and filling soil layer are used in the hole filling pile engineering. Chapter 1 material requirements 1. The cement Use 425 ordinary cement, slag cement or volcanic ash cement to ask for fresh and no lumps. 2. The stones The gravel size is not greater than 50mm; The gravel diameter is not greater than 40mm; The gravel size of the reinforced pile should not be greater than 30mm, and it should not be more than 1/3 of the minimum net distance of the reinforcement. 3. The steel bar The varieties and specifications should be adopted according to the design requirements. Chapter 2 main machine tools 1. Hammer strike pile equipment As a general hammer, hammer, diesel hammer, steam hammer, etc., are composed of pile, pile hammer, pile pipe, etc. The diameter of pile pipe is 270 ~ 370mm, and it is 8 ~ 15m long. 2. Vibration sinking pile equipment It includes DZ60 or DZ90 vibrator, DJB25 type walking bracket, hoist, pressure device, pile pipe, pile tip or reinforced concrete precast boots, etc. The pipe diameter is 220 ~ 370mm, 10 ~ 28m. Machinery and eq