一位老机械工程师的机械设计经验之谈（An old mechanical engineers mechanical design experience）.docVIP

一位老机械工程师的机械设计经验之谈（An old mechanical engineers mechanical design experience） An old mechanical engineer mechanical design wise remark of an experienced person Mechanical design often cannot do without their experience, is the accumulation of experience can learn from the books a lot, but it is difficult to fix things and leave a deep impression in the mind, on the experience of others, they do not have a foundation to understand the absorption, is really a very easy thing to do. Ha-ha。 Mechanical design throughout the design, manufacture, use, maintenance of the whole process, the design of negligence will always be reflected in these areas, success or not is easy to judge. In the process of design, the manufacturing has a great influence, that is to say, the design can not be separated from the manufacture, and the more understanding of manufacturing, the more helpful to improve the design level. Design drawings and put into production, I havent seen many immediately according to the diagram of processing and assembly in the graph, its technological process is very common that bunch of questions, including the so-called senior senior engineer, chief engineer with the drawings, or after several meetings to study repeatedly discussed the results, for many reasons. Standard drawing, viewer level is on the one hand, but the design of the manufacturing process is not in-depth understanding is the main reason. How do you determine your understanding of manufacturing? The easiest way is to grab a picture of your own design. Can you tell me the whole process of making it?. Casting, forging, car, pliers, milling, planing and grinding are just the same. No one knows how to do it in a mechanical factory for a few years It must be subdivided to fully understand the processes. For example, how to divide the type casting time, gate how put, there may be what kind of casting defects, parts structure when heat treatment will lead to the occurrence of accidents, how to optimize the