- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
JB4730与ASME比较(JB4730 is compared to ASME)
JB4730与ASME比较(JB4730 is compared to ASME)
standardized
JB4730 standard and ASME specification
Comparison of the rays
The horse Xiao
(nanhua chemical machinery plant, nanjing 210048)
Abstract: to discuss the differences between the JB 4730-1994 standard and ASME specification in the X-ray detection section, including the inspection
Measurement, geometric inarticulation, penetration thickness, black degree, sensitivity and film rating.
Keywords: radiographic examination; Specification; Standard; Boiler; The pressure vessel
Middle image classification no. : TG115.28 literature identification code: B article number: 1000-6656 (2002) 11-047-02
COMPARISON OF RADIOGRAPHIC TESTING REQUIREMENTS BETWEEN
STANDARD JB4730AND ASME CODE
MA Xiao
(Chemical Industrial Machinery Works, Nanjing Chemical Industrial Co., Ltd, Nanjing 210048, China)
Abstract: Some differences are discussed about standard JB 4730-1994 and ASME code in terms of radiographic testing, in -
Cluding testing thewire, geometric unsharpness, radiographic thickness, density, sensitivity and qualities evaluation.
Keywords: Radiographic testing; Code; Standard; Boiler; Pressure vessel
The manufacture and inspection of boilers and pressure vessels involve a variety of rules
Norm and standard. Currently, the most used foreign pressure vessel standard is
American ASME specification. There are many standards that are not related to Chinese standards
With the point. Now the 1998 edition, 2000 supplement and 2001 edition ASME
Code 5 and volume 8, volume 1, [1] and the pressure vessel of our country
Technical supervision procedures [2], GB 150 [3] and JB 4730 [4] standards are available
Some of the requirements of the test are compared.
1 detection ratio
Safety technical supervision procedures and GB 150 for boilers and pressure vessels
In accordance with the relevant weld requirements, different test ratios are provided, in the product nameplate
The detection ratio should be marked, such as 100% and 20%.
ASME volume 8, vol
您可能关注的文档
- 20100906 元器件的性能变劣现象(The performance of components in the components of the transformer).doc
- A0502、消失模涂料配制(A0502, disappear die coating preparation).doc
- A68EROOT后可删应用整理文档(A68EROOT can be deleted to organize documents).doc
- A68E可删文档(A68E can be deleted).doc
- ABB F开关(ABB switch F).doc
- ABBREVIATION LIST(缩写列表).doc
- ABB变频器面板设定(ABB converter panel Settings).doc
- ABCC(ABCC).doc
- AD9238(AD9238).doc
- ACAA Flash 动画师模拟题(ACAA Flash animator simulation).doc
- JBL报价(JBL quotation).doc
- JAVA面试题解惑(The JAVA interview question answers).doc
- jdk1.6环境变量配置(Jdk1.6 environment variable configuration).doc
- Jpush传入造型以及判断字符串是否是json格式(Jpush passes in the shape and determines whether the string is in json format).doc
- JqueryUIdroppable参数表(JqueryUIdroppable parameter table).doc
- JScrollPane的使用(The use of a JScrollPane).doc
- Jcreator使用教程(Jcreator USES tutorials).doc
- jsjd(jsjd).doc
- jsp常用方法(Common JSP method).doc
- JZ--7常见故障(JZ - 7 common failures).doc
文档评论(0)