moldflow教程题库.ppt

人有了知识，就会具备各种分析能力， 明辨是非的能力。 所以我们要勤恳读书，广泛阅读， 古人说“书中自有黄金屋。 ”通过阅读科技书籍，我们能丰富知识， 培养逻辑思维能力； 通过阅读文学作品，我们能提高文学鉴赏水平， 培养文学情趣； 通过阅读报刊，我们能增长见识，扩大自己的知识面。 有许多书籍还能培养我们的道德情操， 给我们巨大的精神力量， 鼓舞我们前进。 * 15 13 With addition of extra gates, comes the addition of weld lines and possible air traps. These results can also be seen in parts where there are holes as well. With the use of C-MOLD Filling these weld lines can be moved and manipulated to areas of the part where they will not cause problems. By running a few different gate locations, weld lines can be shifted so that they will avoid high stress regions or be moved to high pressure and temperature regions to create strong weld lines. Keep in mind, when moving the gate on a part, you may be increasing the injection pressure and creating unbalanced flow in order to move welds. The engineer must determine if this is a compromise worth making. The part above illustrates the sensitivity of gate placement in a design. SHOULD AND SHOULD NOTS. * 16 14 * 17 15 The same rules that apply to weld lines can be used to demonstrate the air trap results. Part design can play an important role in the creation or elimination of air traps. Some designs may require the use of both thin an thick wall sections. In this case, the thick regions of a part will fill faster than the thin walls. When a thick wall section fill faster than a thin wall section, it is called racetracking. When a thin wall section fills slow, it is called hesitation. Both can be seen in the melt front advancement results. Wide contour spacing indicates rapid movement, and closely spaced lines indicate. The above example shows how part design can create problems in the filling stage. Once again, we can see how the more than one result can be used together to evaluate a design. SHOULD AND SHOULD NOTS. * 18 16 * Moldflow教案 概述 MPA可以理解为 “简易的快速的” MPI。 MPA分析内容少，算法进行了简化，分析速度快。MPA的结果准确性还可以，与MPI基本上一致，只是少一点而已。 MPA(moldflow plastics advisers) 可提供如下分析： 产品结构是否合理 怎样选择合适的注塑材料 怎样确定合理的浇口