一种电网支路与母线连接关系辨识的新方法.pdfVIP

Smart Grid 智能电网, 2016, 6(6), 412-421 Published Online December 2016 in Hans. /journal/sg /10.12677/sg.2016.66045 A New Identification Method of Connection Relationship between Branch and Bus in Power Grid 1 2 2 Weijin Shi , Haibo Zhang , Kai Jia 1 State Grid Quanzhou Electric Power Supply Company, Quanzhou Fujian 2 State Key Laboratory of Alternate Electrical Power System with Renewable Energy Source, North China Electric Power University, Beijing th th th Received: Nov. 29 , 2016; accepted: Dec. 12 , 2016; published: Dec. 15 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract A new identification method of connection relationship between branch and bus based on opti- mizing of the measurement balance index analysis and equipment state similarity in power grid is proposed to solve the problem of detection and identification of network topology in dispatching and controlling system of power grid. Measurement detection, identification and correction are used for the method. Through the analysis of the relation between the branch and the bus, the re- lation between the branch and the bus is defined. Based on the fact that branch measurements in- side an electrical island satisfy a balanced relationship, through the search of relationship be- tween branch and bus, the measurement balance index of each node is qualified and has a most similar bus-branch relationship as actual equipment status and the identi