外墙外保温系统质量控制的关键问题（Key issues of quality control of external external insulation system）.docVIP

外墙外保温系统质量控制的关键问题（Key issues of quality control of external external insulation system） Key issues of quality control of external external insulation system In Europe and North America, the dominant is the expansion of polystyrene board exterior insulation system (EPS) as the main insulation materials, and polymer modified dry mortar bonding fixed on the wall. To protect soft expansion of polystyrene board from damage, a 3-4 mm thick layer of polymer modified cement mortar (plaster mucilage) daub on the surface of polystyrene board, and enhanced embedding special glass fiber grid cloth, and then construction decoration on the surface. This kind of practice, also occupy a considerable proportion all over our country. The main process insulation system can not be separated from the polymer mortar, but also can be separated from the polymer. So, what role does this polymer play in an external thermal insulation system? It can be used to disperse the polymer of latex powder From the point of view of material science, used for exterior insulation system of dry mortar is reliable performance and durability by using inorganic binding material, such as Portland cement and in the form of powder polymer organic adhesive (to disperse polymer latex powder). This polymer adhesive is made from a special polymer emulsion with vinyl acetate, which is processed through a spray drying process. The polymer gelatine was mixed with water and dispersed in the dry mixing mortar, forming a film in the process of mortar hardening. The polymer membrane ACTS as organic adhesive, filler particles and cement hydration products together, reinforced mortar structure, and make the mortar more soft, at the same time provide mortar and base material (such as EPS thermal insulation material) interface between a good cohesiveness. Typical polystyrene board thin plastering exterior insulation system, the bonding mortar layer, plastering mortar strengthening pulp layer and decorative layer (decoration mo