实践日志资料（Practical log data）.docVIP

实践日志资料（Practical log data） In tangyin in chengguan substation monitoring and control system, we can see the basic component of 110 kv main transformer power supply circuit, circuit breaker, isolation switch, grounding switch, voltage transformer, current transformer, capacitor, lightning arrester, bus, etc., let me explain my understanding of the electrical appliances Circuit breaker: under normal circumstances control of various kinds of power lines and equipment start and close of the event of a failure in the power system of the removal of the power system short circuit current, in order to ensure the normal operation of power system. In this internship, two circuit breaker 10KV vacuum circuit breaker and 110KV hexafluoride circuit breaker are used in the station. Load switch: the load switch is an electrical appliance between the circuit breaker and the partition switch. Control all kinds of power lines and equipment switches and switch off and off normally. But the short circuit current cannot be broken. The load switch and the fuse together can realize the function of the general circuit breaker. Isolating switch: the isolating switch is a kind of high voltage switch equipment. In the structure, the isolating switch has no special extinguishing device, so it cannot be used to pull the load current and short circuit current. Normal position separately, isolating switch ends meet safety requirements of visible insulation distance between the two, in the power grid, the main purposes are: 1 for equipment maintenance, isolating switch used to isolate with and without electrical parts, electric form clear breakpoint, to ensure the safety of staff and equipment; The isolation switch and circuit breaker are combined to operate the brake operation to change the operation mode of the system wiring. Its main function is electrical isolation. Earthing switch: it is used for the maintenance of high voltage line electrical equipment to ensure personal safety and grounding,