计算机进制算法（Computer algorithm）.docVIP

计算机进制算法（Computer algorithm） In we want to learn more knowledge about computer is that would inevitably encounter on a variety of mechanisms of calculation and the transformation between them, so I am here to share this knowledge, I hope it can help you. The decimal number The decimal number is the most widely used system in daily life. The symbols that make up the decimal number are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, and so on. We call these symbols digital. In the decimal system, each of the ten digit Numbers in the decimal system is 10, so the counting base is 10. More than 9 must be represented by multiple digits. The operation of the decimal number follows: add: every ten to one; Subtract: borrow one ten. In the decimal number, the position of the digit is different, and the value expressed is different. In the formula, each corresponding digit has a coefficient of 1000,100,101 corresponding to it, and this coefficient is called right or position. The digit of the decimal number is generally expressed as: 10n - 1 In the formula, 10 is the decimal base; The I times of 10 is the right of the I th; N represents the position of the decimal point, the integer; When n is at the left of the decimal point, take n = 1, 2, 3... N. At the right of the decimal point, take n = -1, -2, -3... So 634.27 can be written as: 634.27 = 6 + 3 + 4 x 100 x 101 x 102 + 2 x 10-1 + 7 x 10-2 In normal writing, the digits of each digit are embedded in the digits, i.e. ones, tens, hundreds, etc. Binary binary The information processed by the electronic computer is the information that is represented by the simple digits of 0 and 1, or the encoded information is encoded with this number. This is called binary. To understand the computer, first understand the number of representations in the computer. To distinguish different system said the number of, usually expressed in right around another subscript Numbers or letters system, decimal number with D said that binary expressed with B, hexadecimal