焊条电弧焊单面焊双面成形技术的操作要领与技术（The operation and technology of single side welding of electrode arc welding）.docVIP

焊条电弧焊单面焊双面成形技术的操作要领与技术（The operation and technology of single side welding of electrode arc welding） The operation point and the technique of welding the welding of single side welding of welding electrode arc welding, welding and welding of welding electrode Mei-hua zhu (jiangsu hongxing pressure vessel manufacturing co., LTD.) Abstract: this paper mainly introduces the main points and techniques of welding single surface welding of electrode welding. Namely: five essentials and the six skills, it is to absorb and draw lessons from all over the country welder training experience, on the basis of after years of exploration and practice sums up a set of suitable for boiler and pressure vessel welding forensics welder training teaching methods. After many welders training, the results can be achieved with half the effort. Key words: single face welding, double - side forming, main collar, skill, welder training. 1, the preface One-side welding of difficult forming technology is, welding a technical operation, and also is a kind of skill test, technical duration and, especially, the boiler and pressure vessel welders must master basic skills. As soon as possible to master the single side welding forming technology of main point and skill operation, is not only each skill test, technical duration and the boiler and pressure vessel welder concern of the forensics, and around the welder training school coach must be the main content of explanation and demonstration. In this paper, the following five kinds of main point (see, hear, quasi, short, control) and six skills (article, beginning point, luck, arc, joint, convergent), if the master of the five essentials and six skills basic method, will be out of the internal and external quality qualified welding in the specimen. In this paper, the application of five key leads and six techniques in the welding of welding electrode arc welding of welding electrode is introduced in this paper. 2. five key See 2.1 In the welding pr