论如何简化放大器和混频器的测量（How to simplify the measurement of amplifier and mixer）.docVIP

论如何简化放大器和混频器的测量（How to simplify the measurement of amplifier and mixer） How to simplify the measurement of amplifier and mixer Keywords: amplifier; Mixer; measurement Abstract: in the basic components of radio frequency system, amplifiers and mixers are needed Components that are often tested. Multi-port test system can achieve high speed and high precision simultaneously. A new type of The VNAs internal Settings have two built-in RF signal sources, with two RF signal sources to simplify the amplifier and mix The measurement of the frequency device. For the measurement of the amplifier, two signals can be combined by a signal - to - plexer and then To the input terminal of the measured amplifier (AUT); The NXN measurement method measured by mixer effectively solves the routine Some of the difficulties and technical difficulties that the measurement method cannot solve. At present, the development trend of the continuous improvement of the neutron system integration of electronic products equipment is changing The test mode of amplifier and mixer makes the setting of instrument more simple during testing. The measuring time is shorter and the accuracy is higher. A multi-port test system can achieve high speed and high precision simultaneously The traditional VNA USES an RF signal source as an incentive, and USES multipath measurement receiver to measure positive The incident, reflection and transmission signals in the opposite direction; The traditional VNA has two test ports, because early Most devices have one or two ports. To measure multiport devices, you need to be Multiple test cables and end-to-end loads between different ports of the device (DUT), until all the ends are completed The measurement of the mouth. Now, many of the devices used in the RF system have three or four ports, to seven or eight Ports are becoming more and more common. There are two reasons for the increased number of device ports: one The balance component is widely used, and the other is