雷霆430XP说明书（Thunder 430XP manual）.docVIP

雷霆430XP说明书（Thunder 430XP manual） 4.30xp manual 1 satellite TV equipment 2006-09-07 17:26:56 read 422 comment 0-font size: large and medium sized subscriptions. Currently, 430 receivers have become widely used, but the specifications of the various brand 430 machines are simple and not helpful to users. Although the Chinese menu inside the machine is very detailed, it is not easy to master for first-time users. To celebrate the Spring Festival, make up a detailed manual, as a holiday gift for the friends. To avoid advertising, use XSAT430 as the 430machine for all brands. The front version of this type of machine is basically the same, the interface of the back plate is similar, but the interface position is different. Usually the backboard is equipped with a power switch, and the machine is in standby mode when it is opened, and the power button on the panel or the power button on the remote control is needed to enter the work state. The larger machine system is the pumpkin system and the V + I dual system, which switches different reception systems by moving the Format key on the remote control. There are three cardseats before and after the machine, and the rear cardholder is the I system. The front and rear two are used by the N system and V system. The front of the card is N system, because the manufacturer is different, try to know. For the first time, it should be noted that under the pumpkin system, only the encryption programs of 146, 88, 75 and other stars can be received, and the encryption programs on star such as 76.5 and 110.5 need to be set up under the V + I system. Free programs are not restricted if they receive free programs. You can enter the Settings Menu by pushing the Menu button on the remote control. If there is a password, the default is 1234. If not, enter 6931 general password. Before setting, install the receiving antenna and the high frequency head, and connect the hf head with the receiver correctly with the same axis. If you have multi