axshockwaveflash（axshockwaveflash）.docVIP

axshockwaveflash（axshockwaveflash） C # loads the member functions of Flashs AxShockwaveFlash attribute 1. AlignMode (read and write) Syntax: AlignMode As Long Description: alignment method (linkage with SAlign property). When the width of the control is not consistent with the movie and the WMode is not ExactFit, the movie (which is not amplified) can be adjusted to the position displayed in the control. This attribute value consists of a token bit. As shown in the figure, the corresponding alignment direction is set for the position of the corresponding attribute value (binary). The value of the property and the corresponding alignment (in the parentheses below are binary Numbers) 1: left aligned (0001) 2: right alignment (0010) 4: top alignment (0100) 8: bottom alignment (1000) You can also combine various alignment methods, and you can record two or more digits as 1, which is to add up the four basic values. For example, the left alignment and top alignment are at the same time, and the attribute value is set to 5 (0101). Example: set the movie to the right: Movie. AlignMode = 2 2. BackgroundColor (read and write) Grammar: BackgroundColor As Long explanation: background color of the film (with BGColor linkage). The color value is calculated by (red x 65536 + green x 256 + blue). Red and green blue color fetch range (0-255). The default movie background color is -1. If the movie sets a background color or has a picture as the background, it cant be seen how the change in the property value will affect it. Example: set the background color to blue: Movie. BackgroundColor = 255 3. Base (read and write) Syntax: Base As String Description: specifies the base address for the declaration of all relative paths in the movie. This property is especially useful when the movie is not in the same directory as the other files it needs. If not specified, the Base value is . , which is the path of the current movie. Example: Movie. The Base = HTTP: / / Http:///pathname1/ Pathnam