CAXA制造工程师实体特征造型常见问题（CAXA manufacturing engineer entity characteristic modeling common problems）.docVIP

CAXA制造工程师实体特征造型常见问题（CAXA manufacturing engineer entity characteristic modeling common problems） First, CAXA manufacturing engineers, entities, features, modeling, common problems 1., the entity feature design tree is too large and causes routine operations to be unusually slow. The feature tree is also called the design tree, which records the feature sequence of the model, that is, the feature structure of the model. The feature tree can not only display the order of feature creation, but also get the relevant information of features and operate the features. For example, a component consisting of a number of features, each of which is displayed in the list of feature trees, can be edited by clicking on the arbitrary number of the feature tree. But if the feature tree is too large, it will lead to slow or abnormal operations such as display, edit, drive and so on, which will affect the smooth progress of the modeling process. 2., after the completion of modeling can not be modified again CAXA manufacturing engineer has strong modeling ability, and can be modified at any time any characteristic, in the process of modeling, but if affects the characteristics of interrelated in the modification process, there is marked in the feature tree, display the current characteristics of other problems cannot be modified. 3. complex geometries can not be modeled Entity generation CAXA manufacturing engineer to be carried out, based on creating sketches on a sketch, also known as the outline, the equivalent of the foundation of the building, is a closed curve combination of 3D entity must rely on, is a graphic feature modeling for. In the condition of drawing sketch curve sketch curve, drawing in non condition curve sketch space curve, if sketch curve and space curve confusion, or sketch profile too complex is unable to generate feature modeling. The 4. round (falling) angle transition failed Fillet transition refers to a smooth transition between entities by a given radius or r