材料起重（Material lifting）.docVIP

材料起重（Material lifting） 2H311020 Electrical and mechanical engineering materials This knowledge point is: 1. The classification of steels for engineering components; the relationship between the lower value of yield strength and the plasticity and toughness of metallic materials, forming and weldability and strength; 2. Classification of common nonmetallic materials for electrical and mechanical engineering; (1) Application of macromolecule material in drinking water pipe, upper water pipe and drainage pipe; Low density polyethylene plastic pipes (plastic water pipe): non-toxic, can be used to convey the use of life. The pipes and fittings commonly used in building buildings are hard polyvinyl chloride. This kind of tubing can also be used in industrial drainage systems. (2) The classification of non-metallic duct, according to the pressure, acid-base environment and smoke exhaust system selection principle; (3) Electrical wire and cable are divided into two types of line and cable, the general line according to the weight and flexibility, cable according to the size of the force after laying the principle of selection. The connection of welding machine to electrode in the field of electromechanical installation is not fixed by the welding position, and it is more mobile to use RV-type poly PVC insulated flat-shaped copper conductor cords. VLV32, VV32 type cable: can withstand mechanical external force, and can withstand a considerable pull, can be laid in the shaft, high-rise building cable shaft, and applicable to damp places. I. Single choice questions 1. The column used for the boiler steel frame is usually made of (b) steel. A. Carbon steel B. Steel C Plate D Tubing 2. Weldable high-strength Steels should belong to (d). A carbon structural steel B. High quality carbon structural steels C. Low-alloy carbon structural steels D special can low alloy high-strength steel 3. In the mechanical and electrical installation works, for all types of containers, pipelines fo