珩磨和研磨（Honing and lapping）.docVIP

珩磨和研磨（Honing and lapping） Definition of scientific and technical terms Chinese Name: Name: honing definition: honing English with embedded in the grinding head oilstone pressure on the workpiece surface, honing tool or workpiece and the relative rotation and axial reciprocating motion, with minimum residual finishing methods on the workpiece. Applied disciplines: Mechanical Engineering (first level discipline), cutting process and equipment (two disciplines), cutting process - cutting method (two disciplines) The above contents shall be examined and approved by the National Commission for the approval of scientific and technical terms Catalog (Heng m) Finishing the finishing of the machined surface with a whetstone (also called a honing bar) embedded in the honing head. Boring grinding machine. Main processing straight honing A variety of cylindrical apertures with diameters of 5~500 mm or greater, with a depth to aperture ratio of 10 or greater. Under certain conditions, it can also process plane, excircle, spherical surface, tooth surface and so on. Honing head peripheral Xiangyou 2 ~ 10 root length is about 1/3 ~ 3/4 long hole stone, both rotary motion and reciprocating motion in honing, at the same time by spring or hydraulic control of the honing head and uniform outside the rose, so the larger contact area with the hole surface, high processing efficiency. The dimensional accuracy of the honing hole is IT7 to 4, and the surface roughness can reach Ra0.32 to 0.04 microns. Honing margin depends on the size of the bore and workpiece material, the general cast iron for 0.02 to 0.15 mm, steel parts for 0.01 ~ 0.05 mm. The speed of honing head is generally 100~200 revolutions per minute, and the speed of reciprocating movement is generally 15~20 meters per minute. In order to remove chips and abrasive particles, improve surface roughness and reduce cutting zone temperature, the operation often requires a large number of cutting fluids, such as kerosene or a small am