两台37kW三相交流电动机的动力设计（Power design of two 37kW three-phase alternating current motor）.docVIP

两台37kW三相交流电动机的动力设计（Power design of two 37kW three-phase alternating current motor） Design topic: Power Design of two 37kW three-phase AC motors First, equipment overview and technical parameters Control object is an industrial water plant, two three-phase AC asynchronous motors, so that they work properly. The factory uses a fan cooled three-phase cage type induction motor, the model is YLB200-2-4. Its rated power is 37kW, the rated current is 71.2A, and the rated operating voltage is 380V. The load level is heavy duty, long-term working system. When the motor is running normally, the connection method is Ya shape. Two, design requirements 1, the motor should be able to start running normally, to overload, short circuit, lack of equal protection. 2, can control, start process should have indicator light, normal operation should also have indicator light. 3, one of the motor M1 start, 3 minutes later, another motor M2 can start, and reverse stop. Power Design Manual design scheme Power design of two 37KW three-phase alternating current motor. The three-phase AC asynchronous motor has a Y shape connection when the motor is in normal operation. The work level is heavy duty and long-term working system. A series of protective measures including overload, short circuit and lack of equal protection are required; There is an indicator light when the motor starts and stops; Can control, and is the positive sequence limit start, reverse stop. The work class is overloaded, it shows the working current is larger, while the current startup will be greater, so choose buck started, but the subject requirements during normal working for Y connection, so the choice of series resistance starting. Short circuit protection, use fuse, overload and phase selection, with phase protection function of the thermal relay. Since the rated voltage of the indicator lamp is small, it needs to be reduced to a smaller voltage. Step-down transformer, the entire control circuit voltage down to 220V