叉车考试题 题目（Forklift examination questions）.docVIP

叉车考试题 题目（Forklift examination questions） Research on the theoretical examination of forklift in Shell factory 姓名: 班组: 日期： Note: This paper focuses on the safety of the forklift personnel to understand the operating procedures and maintenance of vehicles. Fill in the blanks (1 minutes per empty, total 5 points) The height of the load shall not obscure the drivers sight. When the special circumstances of the goods affect the forward line of sight, the driver should adopt the way. 2. Forklift factory safe driving speed, into the production workshop area must be low-speed and safe driving. 3. Before you start, observe the surroundings and confirm that there is no obstacle to the safety of the traffic, first and last 。 4. After the engine flameout stops, should pull. Second, the judgment question (1 points per question, a total of 16 points) () at the time of driving, the fork bottom height should be kept 300~400mm, the door frame must be tilted back. () The fork should not be raised too high when traveling. In and out of the work site or on the way, should pay attention to the above the barrier-free scratching. When loading, the fork is not allowed to rise too high, affecting the stability of the forklift. () after unloading, the fork should be landed before the normal driving position. () If there is a pedestrian or a vehicle in the vicinity, a driving signal should be issued first if a sharp turn is made. 5. () The driving forklift in the downhill need to carry out the flameout glide, not special circumstances prohibit the loading of the brakes. 6. () when the forklift is running, the load must be in the lowest position without impeding the driving, and the mast should be tilted forward. The load shall not be elevated in addition to stacking or loading. 7. () forklift lifting or driving, if necessary, personnel can stand on the fork control items and play a balance role. 8. () According to the need, can often carry out single fork work or use fork top objects, pull t